The Toro E-Dingo 500 (Electric Powered) Model 22218
The Toro Electric E-Dingo is the first Toro Dingo made that has zero exhaust emissions. This mini skid steer is ideal for demolition contractors and those working inside to harness the labor saving benefits of the Toro Dingo - while not worrying about polluting the air. The 515 pound rated operating lift capacity makes it simple to move jobsite materials around the building and haul debris and broken concrete. The solid - non marking tires and 4 wheel drive system come standard and the machine is 35.6 inches wide so it can slip in and out of narrow places. The E - Dingo comes with ECO mode, Auto Idle and Inch Mode settings for increased runtimes and pin point maneuverability. The hydraulic system pushes 6.49 gallons per minute to the auxiliary allowing your dingo to use most Toro Dingo hydraulic attachments like the jack hammer, auger, grapple rake etc.
The Toro E-Dingo uses a no maintenance lithium ion battery and can be fully charged in less than 8 hours. This dingo uses the 4 paw 4 wheel drive system which directs hydraulic flow to all the wheels allowing the machine to go where it needs to do and reducing chances of getting stuck. The machine ground speed is up to 2.75 MPH and includes the inch mode setting to move carefully and slowly in very tight areas. This electric Toro Dingo is 82.2 inches long, 35.6 inches wide and 48.7 inches tall. The lift hinge pin height is 66 inches and the E - Dingo weighs 2,076 lbs. Call Trey Willis at 703 919 5291 for more information on the Toro E Dingo 500.