Toro Dingo TX 1000 Narrow Track Turbo
The Toro Dingo TX 1000 Narrow Track Turbo Model 22587
The Toro Dingo TX 1000 Narrow Track Turbo is the perfect machine to get a lot of power through a 36 inch gate. This machine can lift up to 81 inches to the hinge pin and has a rated operating capacity of 1,000 pounds (35 percent of tip). A powerful tier 4 compliant Yanmar turbo diesel engine powers this dingo sending 12.3 gallons per minute to each track drive pump and 13.2 gallons per minute to the auxiliary. The Toro Dingo is fast as well with ground speeds up to 4.1 miles per hour in forward or reverse. A dedicated stand platform comes standard with the loader and thigh and hip padding are used for increased operator comfort. The stand platform also comes with an auxiliary foot control allowing the operator to maintain hydraulic flow to hydraulic attachments so the operator can concentrate on ground speed and attachment positioning.
The Toro Dingo TX 1000 Narrow Track Turbo is 34.6 inches wide and comes with Kevlar reinforced tracks. The machine weighs 2826 pounds and has ground pressure of 6.1 pounds per square inch. This machine has a rated operating capacity of 1000 pounds with a machine weight of 2826 pounds is pretty impressive. Toro has redesigned this dingo's ground drive controls with a patented joystick/handle design that is very easy to use and master. The fuel tank holds 10.25 gallons of diesel preventing the need for refilling in the middle of a workday. The Toro Dingo TX 1000 Narrow Track Turbo is in a class all its own. Call Trey Willis at 703 919 5291 for purchasing information and cost.
Toro Dingo TX 1000 Narrow Track Specifications
Air Filter - Remote: Primary and Safety Elements
Cooling System - Combo Crossflow Radiator and Oil Cooler
Dump Angle - 40 deg
Dump Height - 60.3 in. / 153.2 cm
Engine Horsepower - 24.7 hp (18.4 kW)
Engine Make - Yanmar
Engine Model - 3TNV80FT Turbo Diesel Tier 4 & EU Stage 5 compliant
Fuel Tank - 10.25 gal. / 38.8 L
Fuel Type - Diesel
Ground Clearance - 5.9 in. / 14.9 cm
Ground Pressure - 6.1 psi
Ground Speed Forward - Up to 4.1 mph / 6.6 km/h
Ground Speed Reverse - Up to 4.1 mph / 6.6 km/h
Height - 54.6 in. / 138.7 cm
Height With Bucket - 54.6 in. / 138.7 cm
Hinge Pin Height - 81 in. / 205.7 cm
Hydraulic Flow Traction - 12.3 GPM
Hydraulic High Flow - 13.2 GPM
Hydraulic Low Flow - 4.9 GPM
Hydraulic Pressure - 3,000 psi
Length - 83 in. / 210.8 cm
Length With Bucket - 104 in. / 264.2 cm
Loader Arms - Vertical Lift
Max Operating Height - 106.2 in. / 269.7 cm
Oil Capacity - 3.8 qt / 3.6 L
Rated Operating Capacity - *1,000 lbs / 454 kg
Reach Fully Raised - 23.3 in. / 59.2 cm
Reservoir Capacity - 8.6 gal. / 32.5 L
System Capacity - 11.5 gal. / 43.5 L
Track Length - 126.6 in. / 321.5 cm
Track Width - 5.9 in. / 14.9 cm
Tracks - MERT track with “B” style tread
Traction - Dual Hydrostatic Pump
Weight - 2,826 lbs / 1,282 kg
Wheelbase - 39 in. / 99.0 cm
Width - 34.6 in. / 87.8 cm
Width With Bucket - 42.2 in. / 107.2 cm
The Toro Dingo TX 1000 Narrow Track Turbo is the perfect machine to get a lot of power through a 36 inch gate. This machine can lift up to 81 inches to the hinge pin and has a rated operating capacity of 1,000 pounds (35 percent of tip). A powerful tier 4 compliant Yanmar turbo diesel engine powers this dingo sending 12.3 gallons per minute to each track drive pump and 13.2 gallons per minute to the auxiliary. The Toro Dingo is fast as well with ground speeds up to 4.1 miles per hour in forward or reverse. A dedicated stand platform comes standard with the loader and thigh and hip padding are used for increased operator comfort. The stand platform also comes with an auxiliary foot control allowing the operator to maintain hydraulic flow to hydraulic attachments so the operator can concentrate on ground speed and attachment positioning.
The Toro Dingo TX 1000 Narrow Track Turbo is 34.6 inches wide and comes with Kevlar reinforced tracks. The machine weighs 2826 pounds and has ground pressure of 6.1 pounds per square inch. This machine has a rated operating capacity of 1000 pounds with a machine weight of 2826 pounds is pretty impressive. Toro has redesigned this dingo's ground drive controls with a patented joystick/handle design that is very easy to use and master. The fuel tank holds 10.25 gallons of diesel preventing the need for refilling in the middle of a workday. The Toro Dingo TX 1000 Narrow Track Turbo is in a class all its own. Call Trey Willis at 703 919 5291 for purchasing information and cost.
Toro Dingo TX 1000 Narrow Track Specifications
Air Filter - Remote: Primary and Safety Elements
Cooling System - Combo Crossflow Radiator and Oil Cooler
Dump Angle - 40 deg
Dump Height - 60.3 in. / 153.2 cm
Engine Horsepower - 24.7 hp (18.4 kW)
Engine Make - Yanmar
Engine Model - 3TNV80FT Turbo Diesel Tier 4 & EU Stage 5 compliant
Fuel Tank - 10.25 gal. / 38.8 L
Fuel Type - Diesel
Ground Clearance - 5.9 in. / 14.9 cm
Ground Pressure - 6.1 psi
Ground Speed Forward - Up to 4.1 mph / 6.6 km/h
Ground Speed Reverse - Up to 4.1 mph / 6.6 km/h
Height - 54.6 in. / 138.7 cm
Height With Bucket - 54.6 in. / 138.7 cm
Hinge Pin Height - 81 in. / 205.7 cm
Hydraulic Flow Traction - 12.3 GPM
Hydraulic High Flow - 13.2 GPM
Hydraulic Low Flow - 4.9 GPM
Hydraulic Pressure - 3,000 psi
Length - 83 in. / 210.8 cm
Length With Bucket - 104 in. / 264.2 cm
Loader Arms - Vertical Lift
Max Operating Height - 106.2 in. / 269.7 cm
Oil Capacity - 3.8 qt / 3.6 L
Rated Operating Capacity - *1,000 lbs / 454 kg
Reach Fully Raised - 23.3 in. / 59.2 cm
Reservoir Capacity - 8.6 gal. / 32.5 L
System Capacity - 11.5 gal. / 43.5 L
Track Length - 126.6 in. / 321.5 cm
Track Width - 5.9 in. / 14.9 cm
Tracks - MERT track with “B” style tread
Traction - Dual Hydrostatic Pump
Weight - 2,826 lbs / 1,282 kg
Wheelbase - 39 in. / 99.0 cm
Width - 34.6 in. / 87.8 cm
Width With Bucket - 42.2 in. / 107.2 cm
