Toro Dingo Attachments
Toro Dingo Attachments
One of the many reasons that the Toro Dingo is so popular is the long list of attachments that are available to them. Toro designs their attachments to exceed expectations. They use heavy duty bearings, shielded seals and high performing hydraulic motors to ensure the attachments do the job effectively and last a long time. Dingo attachments are easy to operate, deliver clear line of sight, have excellent operator mobility and are easy to take on and off. Take a look at the different attachments available for your dingo and see which ones can make your business more efficient. Call Trey Willis at 703 919 5291 to order your attachments.
One of the many reasons that the Toro Dingo is so popular is the long list of attachments that are available to them. Toro designs their attachments to exceed expectations. They use heavy duty bearings, shielded seals and high performing hydraulic motors to ensure the attachments do the job effectively and last a long time. Dingo attachments are easy to operate, deliver clear line of sight, have excellent operator mobility and are easy to take on and off. Take a look at the different attachments available for your dingo and see which ones can make your business more efficient. Call Trey Willis at 703 919 5291 to order your attachments.
|
Toro Dingo BucketsThere are 3 bucket sizes to choose from for all models (excluding the TX 1000). These bucket sizes are 34.5, 42, or 48 inches wide and hold 3.5, 4.3 or 6.9 cubic feet respectively. The TX 1000 has 2 buckets made especially for it and hold 4.3 or 9 cubic feet. Tooth bars are available for dingo buckets.
Toro 4 and 1 Bucket Attachment The Toro Dingo 4 and 1 bucket is a hydraulic attachment that allows the bucket to open in the middle. With the bucket closed use it as a normal bucket to move dirt, stone and other materials. Hydraulically open the bucket to dump in higher up areas. Open the bucket and use the cutting edge to back drag over areas to level. This bucket can also be used as a grapple to pick up debris. The bucket is 49 inches wide.
|
|
Toro Dingo Adjustable ForksToro dingo adjustable forks are a must have for dingo owners. The new design includes a thicker and stronger fork. Applications for this attachment include moving pallets, moving and setting trees, carrying lumber, moving boulders etc.
|
|
Toro Dingo Ride On PlatformsToro Dingo stand on platforms are available for both gas and diesel machines. The are designed to decrease operator fatigue, increase line of sight and also enable the dingo to lift more. These platforms also can fold up out of the way allowing the operator to walk behind the machine instead of riding.
|
|
Toro Dingo Trencher AttachmentThe Toro Dingo trencher attachment makes digging into the ground easy. It is available in high torque or high speed models. Choose between booms of 24, 36 or 48 inches long and chain widths between 4, 6, 8, 10 and 12 inches wide. Chain configurations can be all soil teeth, all rock teeth or a combination of soil and rock. The trench crumber is an optional attachment for the trencher.
|
|
Toro Dingo Auger Head AttachmentThe auger head attachment for the dingo is very powerful and works great in tough digging environments. This auger head is available in high torque or universal swivel models. The high torque model is the most common model we sell and can spin auger bits up to 36 inches around. The universal swivel auger can swing plum and level and is best suited for fence post digging in uneven terrain.
|
|
Toro Dingo Grapple RakeThe Toro Dingo Grapple Rake is a great tool for tree and brush removal as well as moving boulders. It has two hydraulic cylinders that provide a clamp down force of 3000 pounds. It is also narrow at 35.5 inches wide and easily fits through gates.
Toro Dingo Grapple Bucket The Toro Dingo grapple bucket has a solid bottom and hydraulic tines at the top. This attachment is great for removing and hauling debris for residential or commercial properties. The hydraulic cylinder has a protective metal shield over it to help prevent damage to the cylinder. This grapple bucket is 33.5 inches wide.
|
|
Grapple RakeErskine brand grapple rake is made to fit the Toro Dingo and other mini skid steers with similar mount. Made in with grade 50 steel and comes with one 3000 pound hydraulic cylinder. This attachment is made in the USA.
|
|
Grapple BucketErskine brand grapple bucket works with Toro Dingo and other mini skid steer brands. This is a great grapple attachment plus can be used as a ground groomer by picking up unwanted debris and leaving the soil behind. Comes with two 3000 pound hydraulic cylinders and is made in the USA.
|
|
Toro Dingo Tiller AttachmentThe Toro Dingo tiller attachment comes with hardened steel tines designed for any soil condition. This attachment can till more than 6 inches down and 40 inches wide in one pass. The tines are able to spin both directions and the overall width of the unit is 44 inches.
|
|
Tiller AttachmentErskine brand tiller attachment that fits mini skid steers and the Toro Dingo. This unit can till up to 4 inches deep and uses double edged hardened tines that can spin both directions. This tiller is built with a direct drive hydraulic motor which increases production and reduces maintenance costs.
|
|
Toro Dingo Cultivator AttachmentThe Toro Dingo cultivator attachment is made for one pass tilling. The tines are designed to till and bury stones, debris and grass clogs. The mesh roller bar in the front helps smooth the tilled area out. This is the perfect attachment for sod and new lawn preparation.
|
|
Toro Dingo Harley Rake AttachmentThe harley rake attachment (aka power box rake) uses a beater bar to pulverize rough soil. Great for grading because it can cut down high spots and fill in low ones. Can be manually angled to 20 degrees. Great tool for seed and sod prep.
|
|
Soil Conditioner AttachmentThe Erskine brand soil conditioner is a great tool for grading and sod/seed prep. It uses direct drive technology to lower maintenance costs. Solid foam tires are standard and the wheel arms can move up out of the way for deep digging.
|
|
Toro Dingo Concrete MixerThe Toro Dingo concrete mixer can mix up to 200 lbs at one time. Hydraulically spin the bowl one way to mix up the concrete and then spin the bowl the other direction to pour. A high torque power head attachment is needed to work this attachment.
|
|
Toro Dingo Backhoe AttachmentThe Toro Dingo backhoe attachment turns your dingo into a mini excavator. The outriggers on this attachment fold up to 35 inches wide so you can get through narrow gates. Use this attachment for trenches, drainage projects and foundation excavation. The digging arm swings 180 degrees and the bucket is 13 inches wide (other bucket sizes available).
|
|
Toro Dingo Vibratory PlowThe Toro Dingo vibratory plow can pull pipe and/or cable through difficult soil conditions. It comes standard with a depth gauge so the operator knows how deep they are pulling at all times. Very tight turning radius allows for pinpoint maneuvering in confined spaces.
|
|
Toro Dingo Bore Head DriveThe bore head drive gives the Toro Dingo the ability to bore holes underneath side walks and driveways. After the hole is drilled a reamer can be attached to pull pipe through the bored hole.
|
|
Toro Dingo Hydraulic BreakerThe Toro Dingo hydraulic breaker is very powerful delivering 175 foot pounds of force and 1200 blows a minute. This attachment can be used in vertical or horizontal positions. Its compact size lets this hydraulic breaker go where others can not.
|
|
Jack Hammer AttachmentThis Erskine brand jackhammer attachment is made to be used by the Toro Dingo and other loaders with the same attach plate. The smart and efficient design provides a workhorse with only two moving parts. Smash through concrete and asphalt with ease. Made in the USA.
|
|
Toro Dingo Tree Forks AttachmentThe Toro Dingo tree fork attachment allows operator to gently pick up and move b and b trees. One of the forks hydraulically opens and closes to securely pick up and place trees.
|
|
Toro Dingo Leveler AttachmentThe Toro Dingo leveler attachment has two main uses. It can be used to grade and finish lawns by smoothing out loose soils. This attachment can also be used as a carry all by moving job materials around the site.
|
|
Toro Dingo Snowblower Attachment
The Toro Dingo snow thrower attachment is a 2 stage blower and has a working width of 44 inches. A handle located near the operator turns the chute to blow snow where needed. This is a great attachment for clearing driveways, side walks and breaking down huge piles of snow. There is a snow canopy available separately for the Toro Dingo 1000 models only.
Toro Dingo Boss Snow Plow The Toro Dingo Boss Snow Plow Attachment is great for moving snow. This plow is available in both 4 and 5 foot wide sizes and can be hydraulically angled 30 degrees in either direction. A full blade trip design helps prevent plow damage. Shoe and deflector kits are also available.
|
|
Toro Dingo Stump GrinderThe Toro Dingo stump grinder attachment is a great attachment to expand your business. Its rugged design will make powder of the toughest stumps. Its 17 inch wheel diameter can grind up to 36 inches above grade and 16.5 inches below grade.
|
|
Stumpgrinder AttachmentThis Erskine brand stump grinder attachment is made to fit the Toro Dingo and other mini skid steers. Its designed to grind left to right like most stand alone stumpgrinders. It comes with a joystick that controls the left and right swing. It uses 24 carbide teeth and a 14.5 inch cutting wheel.
|
|
Toro Dingo Trencher FillerThe Toro Dingo trencher filler attachment uses two horizontal augers to push trench spoils back in the trench.
|
|
6N1 Combination BucketThe Erskine brand 6N1 hydraulic bucket is made to use on the Toro Dingo and other mini skid steers. It uses two 3000 pound cylinders that open and close the bucket. It is made of grade 50 steel and is made in the USA.
|
|
Brush Mower AttachmentMade to be used with the Toro Dingo this brush mower can cut materials up to 2 inches in diameter. This attachment cuts moving forward and reverse and the blades have dual edges for longer life. Made by the Erskine company in the USA.
|
|
Hydraulic Broom AttachmentDesigned to work with the Toro Dingo and other mini skids, this broom is a great attachment for light snow removal and property clean up. It can angle 25 degrees to the left and the right. Optional hydraulic angling is available.
|
|
Pick Up Broom AttachmentMade to be used by the Toro Dingo and other mini skid steers this pick up broom attachment is completely covered to contain dust. Poly and Steel wafer bristles are available. Made by the Erskine Company in the USA.
|