Avant Loader Attachments

​Avant Loaders are made more versatile by the large amount of attachments available to them.   Below is a list of just some of the attachments that Avant makes.  Please keep in mind that not every attachment works with every Avant model.

Avant Buckets

There are many different bucket options available.  Sizes range from 35.4 to 71 inches wide.  Bucket capacities range from 5.3 to 24.7 cubic foot.  Avant buckets are also available with and without cutting teeth.

Avant 4 and 1 Bucket

The Avant 4 and 1 bucket uses 2 hydraulic cylinders to open and close the bucket.  This bucket can be used as a standard bucket and can also be used as a scraper with the bucket open.  The 4 and 1 bucket is available in 43.3, 50.4, 57.1 and 63 inch widths and available with and without teeth.

Avant High Tip Bucket

The Avant high tip bucket is an excellent choice for dumping large volumes of materials to high places.  A light duty and XP tip bucket are available.  A hydraulic cylinder (or cylinders) dumps the bucket enabling this bucket to dump at higher heights than a standard bucket.  Bucket capacities go up to 29 cubic foot.

Avant Leveling Bucket

The Avant leveling bucket is available in 57.1 and 63 inch widths.  This bucket excels at back grading and the low back design gives the operator a better view of the cutting edge.  

Avant Stone Collecting Bucket

This stone collecting bucket by Avant is a great tool for removing stone and debris from soils.  The stones and debris are picked up and the loose soils fall out through the slats.  41.3 and 54 inch wide buckets available.

Avant Skip Bucket

Avants skip bucket is a large volume bucket of either 22.2 cubic foot or 33.5 cubic foot.  Optional caster wheels can be installed to roll the bucket around.  This is a great attachment for moving and dumping large volumes of material.

Avant Adjustable Pallet Forks

Avant pallet forks are available with 33.5, 43.3 and 47.2 inch long forks.  A bolt on back frame comes standard with all forks (not shown in picture).   Fork width can be adjusted to suit material handling needs.

Avant Side Shift Pallet Forks

The hydraulic Avant pallet forks allow the forks to move in and out hydraulically.  Additionally these hydraulic forks can hydraulically side shift for easy pallet positioning.  The forks on this attachment are 43.3 inches long and can handle a 2,650 lb load.

Avant Grapple Bucket

The Avant multipurpose grapple bucket uses one hydraulic cylinder to open and close the tines.  3 models are available at 35.4, 41.3 and 51.2 inches wide.

​

Avant Demolition Grapple Bucket

The demolition grapple made by Avant uses two shielded hydraulic cylinder to open and close the tines.  Two models are available at 42.5 and 51.2 inches wide.

Avant Root Grapple

Great for the tree industry.  The Avant root grapple uses two hydraulic cylinders to open and close the tines.  Bottom digging tines are good for root removal and allowing dirt and debris to fall out between spacing.

Avant Log Grab

The Avant log grab attaches to adjustable forks (adjustable forks are required) and allows a top tine to hydraulically grab onto whatever the adjustable forks are holding.  Great attachment for moving boulders and logs.

Avant Heavy Duty Log Grab

The Avant heavy duty log grab is meant for just that.  Picking up and moving heavy logs.  This attachment is 33.3 inches wide.

Avant Timber Grab Swinger

The Avant timber grab allows logs to be carried easier through narrow passage ways.  The hydraulic grapple opens up to 48.1 inches wide for larger logs.  Free rotation and hydraulic rotation models are available.

Avant Winch Attachment

The Avant winch comes with a safety net, guiding rollers, 100 feet on cable and a towing hitch.  This winch has max pulling power of 2200 lbs and can pull in at 7.5 foot a second.  

Avant Stump Grinder Attachment

The stump grinder attachment by Avant features a 21.3 inch cutting wheel with 20 cutting teeth.  Each tooth has three cutting edges on it so when a tooth becomes dull just spin the tooth for a new cutting edge.  A rubber cover comes standard to help prevent wood pieces from flying around.

Avant Tree Shear

The Avant tree shear can be used to cut trees up to 7.5 inches in diameter. The jaws open to 30.3 inches wide and this attachment can also be used as a grapple to move logs around.

Avant Log Splitter

The Avant log splitter uses two hand operation levelers for user safety.  These splitters have two cutting speeds and can do 2 way or 4 way split.  Two models available.  Smaller model has 8.4 tons splitting force and can cut a 15.7 inch diameter log.  Larger model has 11 tons splitting force and can cut a 15.7 inch diameter log.

Avant Log Cutter and Splitter

The log cutter and splitter by Avant is a combination chain saw and splitter.  This attachment can handle 12 inch diameter logs and a self lubricating chainsaw cuts the log.  The log drops and a log splitter splits the wood.  A conveyor belt can be added onto this attachment.

Avant Firewood Machine

The Avant firewood machine can handle an 11.8 inch diameter tree.  The tree is first cut into log size by a metal saw blade.  The user then places each log into a cutting tray and pushes the log into a cutting screw to make fire wood.

Avant CH 100 Wood Chipper

The CH 100 chipper from Avant is a manual feed chipper that can handle 4 inch brush.  The discharge tube can rotate 180 degrees.

Avant CH 150 Wood Chipper

The Avant CH 150 wood chipper can handle 6 inch brush.  This chipper comes with 2 feeder rollers that will stop feeding the chipping drum if the drum drops to a low rpm.  The discharge chute rotates 270 degrees.

Avant Jib Boom

The jib boom made by Avant allows the user to lift heavy loads in tight areas.  A basic boom model and a hydraulic telescoping model are available.  

Avant Trencher Attachment

The Avant trencher attachment is a great tool for drainage, electrical, irrigation and communication installations.  This trencher can dig up to 3 foot deep and can cut from 4 to 8 inches wide (depending on chain set up).  Chain options with soil teeth, shark teeth and combination teeth are available.

Avant Auger Attachment

There are 3 different models of the Avant auger attachment available.  These quality built auger heads can spin 6 inch through 36 inch wide Avant auger bits (depending on auger head model).  Auger bit cutting styles include soil bits, soil bits with tungsten and rock bits.  Auger bit extensions also available for added digging depth.

Avant Ball Hitch Attachment

The Avant ball hitch attachment makes it easy to move trailers and equipment around.  A hydraulic ball hitch attachment is also available with up and down hydraulic motion for quicker hook up to trailers and equipment.

Avant Compressor Attachment

The Avant air compressor is available in a front mounted model or rear mounted model.  This compressor creates maximum 105 gallons a minute at 115 PSI pressure.

Avant Pressure Washer Attachment

The pressure washer for the Avant is available in a front mounted model or rear mounted model.  This pressure washer comes with a 65 foot hose reel and creates a maximum 8 gallons a minute water flow and 2900 PSI pressure.

Avant High Pressure Washer

The Avant high pressure washer is great for street cleaning.  3 water tanks are available that hold between 73 and 221 gallons.  All high pressure washers come with rotatable spray nozzle for street cleaning and a handheld washing gun with 65 foot hose reel.

Avant Backhoe Attachment

The Avant backhoe attachment is available in 4 different models.  Digging depths range from 66.9 to 102 inches deep and bucket widths available from 9.8 inches to 39.4 inches depending on model.  Hydraulic outriggers, dozer blade and bucket sideways tilt adapter available on larger models.  Operator remote control available on the 260 model so operator can operate outside of the Avant.

Avant Mini Digger Attachment

The Avant mini digger is a great attachment for smaller digging jobs.  This attachment comes in two models with max digging depths of 47.2 or 59.1 inches.  Bucket widths available are 9.8, 15.7 and 29.4 inches.  Larger model can be fitted with a 39.4 inch bucket and also have a bucket tilt adapter installed.

Avant Hydraulic Breaker Attachment

The hydraulic breaker (aka jackhammer) for the Avant is the perfect attachment for efficient concrete removal.  These breakers are available in 3 different models with impact rates of 600-3200 bmn, 800-3000 bpm and 700-2600 bpm (depending on model).  Breaker bits are available in chisel, wedge, moil point and blunt profiles.

Avant Concrete Crusher Attachment

The Avant concrete crusher is a great tool for the demolition contractor for crushing concrete, brick and metal.  The attachment comes with free rotation to allow self positioning when working.  The max cutting force is 287,000 pounds and the max crushing force is 97,000 pounds.  Jaws open 15.7 inches wide and different cutting tips are available.

Avant Concrete Mixing Bucket

The Avant concrete mixing bucket has a bucket volume of 7.4 cubic feet.  Once mixing of concrete is complete a hydraulic cylinder opens a hatch located at the bottom of the bucket to dump the concrete.  A flexible emptying tube also comes with the attachment.

Avant Concrete Mixing Bowl

The concrete mixing bowl for the Avant loader makes it easy to make and move small batches of concrete.  Also great for pouring concrete into high places.

Avant Dozer Blade Attachment

The Avant dozer blade can be used to push snow or dirt.  Hydraulic angling and a spring release mechanism are standard.  3 models available.  Larger model comes with skid shoes, 10 degrees sideways float and side extensions.  Ice and rubber edges available.

Avant V Snow Plow

The Avant V snow plow uses two independent hydraulic cylinders to control each side of the blade.  Spring release mechanism is installed to reduce impact when hitting unexpected obstacles.  Floating mechanism, support legs and skid shoes are standard.  72.4 and 96.5 inch blades available.

Avant Flipper Bucket

The Avant flipper bucket is made for moving snow long distances.  The front flippers independently open and close.  This bucket can hold 26 cubic feet of materials. 

Avant Snow Blower Attachment

The 2 stage snow blower attachment for the Avant is a great tool for snow removal.  The discharge chute can be rotated 270 degrees from the drivers seat.  Throwing height can be adjusted manually or electrically as an option.  This snow thrower has a 43.3 inch working width.

Avant Rotary Broom

The Avant rotary broom is great for snow removal or site clean up.  3 models to choose from for either 43.4, 59 or 79 inch wide brooms.  25 degree turning angle with either manual or electric turning controls depending on model.

Avant Sand and Salt Spreader

The Avant sand and salt spreader is available in 3 different models with front and rear mounted designs available.  A hydraulic motor drives an axle that breaks up big pieces of salt and spring loaded plates are installed to reduce blockages and damage done by rocks or debris.  5.7, 7.1 and 17.7 cubic foot volumes available.

Centrifugal Sand/Salt Spreader

This Avant spreader can distribute sand and salt from 6 to 20 feet.  The spreading amount can be adjusted on the side of the attachment.  This spreader has a hopper volume of 8.8 cubic foot.  Front and rear mounted models available.

Avant Towable Spreader

The Avant towable spreader is used to spread salt and sand while being towed behind the loader.  The spreading action is powered by the wheels being driven and a clutch is installed to turn off spreading while the attachment is being pulled around.  The spreading width is 39.4 inches and the hopper volume is 8.1 cubic feet.

Avant Cultivator Attachment

The Avant cultivator attachment is like a tiller in which it breaks up soil in preparation for seed and sod.  Cultivating depths range from 2 - 6 inches.  Models with a 43.3 and 51.2 inch widths available.  A field roller can be installed to help tamp down the ground after it has been cultivated.

Avant Stone Buryer

The Avant stone buryer tills up the ground up to about 6 inches depp and buries stones and debris in the tilled soil.  The roller on the back helps grade the tilled soil leaving a great seedbed.   44.5, 51.2 and 59.1 inch working width models available.  A seeder attachment can be added for a one pass till and seed job.

Avant Rotary Harrow

The rotary harrow by Avant is very similar to the stone buryer by tilling and leveling the soil.  The main difference is the rotary harrow is meant to not till as deep as the stone buryer but till smaller depths with a greater ground leveling focus.  41.3, 48, 55.1 and 61 inch working width models available.  Seed attachment can be added to most models.

Avant Leveler Attachment

The Avant leveler is a great tool for yard leveling, sand leveling and driveway leveling.  47.2 and 59.1 inch models available.

Avant HD Leveler

The HD leveler by Avant has a bucket cutting edge on the front and rear to breakup uneven ground.  This attachment also includes a tray in the front to pick up unwanted material.  A scarifier bar in the rear is equipped with hooks that can be set at different depths or in the up position out of the way.

Avant Roller Compactor

The roller compactor by Avant has a working width of 59.1 inches and is available in mesh or solid models.  The solid models can be filled with water to increase compaction on the ground.

Avant Front Rake

The front rake by Avant is a great tool for leveling sand and gravel.  Can also be used for loosening and leveling uneven soils.  This attachment is 78.7 inches wide.

Avant Ripper Attachment

The Avant ripper attachment can be used to remove roots and rocks embedded in the soil.  This attachment comes with replaceable teeth.

Avant Screening Bucket

The Avant screening bucket is used to screen and blend soils, aggregates and compost.  The screening process keeps the rocks, sod and vegetation from being crushed and blended into the soil.  This bucket has a 9.1 cubic foot volume.

Avant Lawn Mower 1200

The Avant lawn mower 1200 has a 47.2 inch cutting width and can cut 1 to 4 inches high.  This mower comes with the optifloat system which gives optimal touch on the ground on uneven surfaces.  A safety valve comes standard so the mower blades turn off when the mower deck is lifted off the ground.  This is a mulching mower but side discharge is optional.

Avant Lawn Mower 1500

The Avant lawn mower 1500 has a cutting width of 59 inches and is designed for more demanding cutting jobs.  This mower comes with a side discharge standard but a mulching kit is optional.  The 1500 comes with optifloat for excellent touch on the ground on uneven surfaces and comes with a safety valve that turns the mower blades off when the deck is lifted off the ground.

Avant Collecting Lawn Mower 1200

The 1200 collecting lawn mower by Avant is a mulching mower that collects the grass clippings, leaves and debris.  The blades cut the material into fine pieces and the holding capacity is 7.4 cubic feet.  Dumping the debris holder is easily done by lifting the attachment off the ground and tilting it forward.

Avant Collecting Lawn Mower 1500

​The 1500 collecting lawn mower has a cutting width of 59 inches and is great for leaf removal too.  The collector box volume is 28 cubic feet and the box can be emptied from the drivers seat.  This attachment comes with optifloat and has more cutting power than the 1200.

Avant Vacuum Brush

The vacuum brush by Avant is a dedicated tool for picking up leaves.  A brush at the bottom of the vacuum helps loosen and pick up wet leaves.  This vacuum has a working width of 47.2 inches and has a holding capacity of 28 cubic foot.  Dumping the debris can be done from the drivers seat.  Side brushes are optional.

Avant Flail Mower

The Avant flail mower comes in a 47.2 and 59 inch cutting width.  This is a great tool for cutting tall and unkept grass.  This attachment will cut up to a 0.8 inch tree branch.

Avant Flail Mower with Boom

This flail mower for the Avant comes with a hydraulic boom to get to hard to cut areas.  This attachment can reach out 138 inches and has a cutting width of 39.4 inches.  A joystick control comes standard allowing for pinpoint control of the mower.

Avant Cutting Bar

The cutting bar for the Avant is a great tool for cutting long grasses and hedges.  The 57.1 inch cutting length can be angled below grade level for cutting V ditches and slopes.  A spring loaded release mechanism allows the bar to move backwards if it hits an unexpected obstacle.

Avant Edge Timmer Attachment

The Avant edge trimmer attachment consists of a disc that cuts the edges of the grass or flower beds for a professional look.  A trimmer near the disc breaks up any soil or grass that is on the inside of the disc.  

Avant Weed Brush Attachment

The weed brush attachment by Avant is used to remove weeds from paved areas.  The steel wire head can be positioned to the front, left or right side.

Avant Collecting Broom 1100

The Avant collecting broom is a great attachment for removing debris and leaves from paved surfaces.  The brush sweeps the debris to a collecting system that can hold a volume of 21 gallons.  The debris collection box can be dumped hydraulically and a water spray system is optional.

Avant Bucket Broom Attachment

The Avant bucket broom is used for sweeping up and removing debris from paved surfaces.  A 43.3 and 59.1 inch broom width models available.  The front broom hydraulically raises up to dump the collected debris.  Water spray system is optional.

Avant Vibratory Plate Compactor

The plate compactor by Avant has a plate size of 19.7 by 11.2 inches.  This attachment has an impact force of 1985 pounds at 2000 BPM.

Avant Stone Grab Attachment

The Avant stone grab attachment is a non hydraulic attachment that is great for stone, concrete, curbs and tombstones etc.  The gripping width is between 2 and 19 inches and the lifting capacity is 1985 pounds.  The grabs have a replaceable rubber padding to help prevent damaging the object being moved.

Avant Paver Installation Clamp

The paver installation clamp by Avant allows the loader to install a whole layer of pavers at once.  The gripping width is between 22.6 and 49 inches and the attachment comes with hydraulic rotation for pin point accuracy.

Avant Disc Scraper Attachment

The Avant disc scraper is a great attachment for removing carpet and floor tiles for demolition and renovation work.

Avant Asphalt Grinder Attachment

The Avant asphalt grinder (aka cold planer) has an 11.8 inch working width and can grind down to 4.7 inches deep.  Different types of teeth are available for asphalt and concrete applications.  A water spraying system is available as an option.

Avant Tool Box 

The Avant tool box can be attached to your loader and moved around.  The lid comes with 4 gas springs for opening and can be locked to keep whats inside secure.

Avant Hand Held Tools

Avant offers some hand held tools that are not attached on the front of the loader but are attached to the auxiliary hydraulics.  The hand held tools available are a cut off saw, jack hammer, core drill and a submersible pump. 

Avant Artificial Turf Attachment

The artificial turf attachment cleans, filters and returns infill in one pass.  The light foot print of the Avant ensures very little impact on the turf.  This attachment has a working width of 47.2 inches and an adjustable rear brush grooms the turf after cleaning.

Avant Artificial Turf Brush

The Avant artificial turf brush grooms the turf to make it softer.  This attachment is made for daily use on turf using its triple brushing (straight, diagonal, straight) action to distribute infill and fluff up turf fibers.

Avant Leguan Lift Attachment

The leguan lift attachment for the Avant is a great attachment to reach high places in and outdoors.  This attachment can lift 197 inches high and can lift 440 pounds.

Avant Bee Hive Mover

The Avant bee hive mover is a specialty attachment made to move beehive boxes.  This bee mover works by the top pads being hydraulically lowered to gently hold the boxes onto the forks below.  This attachment can move as many as 12 beehive boxes at a time and can lift up to 2204 pounds (depending on loader used)​

Avant Ice Rink Scraper

The Avant ice rink scraper blade is made to clear snow and unwanted ice off of hockey or skating rinks.  The blade is 118 inches wide and can be hydraulically turned 30 degrees.

Avant Tipping Trailer

The Avant tipping trailer uses a hydraulic cylinder to dump the payload.  Two models are available with one model that can handle 2650 pounds and the other model can handle 4000 pounds.  All sides can be removed if necessary.  Rear hydraulic adapters and rear hitch needed to use trailer.

Avant Timber Trailer

The timber trailer from Avant can haul soil, mulch and aggregates and can also be used to haul logs by removing the side panels.  This trailer comes in either dual or single axle and has a manual tilt.  

Avant Grabbing Tool Attachment

The Avant grabbing tool attachment is perfect for picking up and moving potted plants and barrels.  This attachment can handle round objects from 10 to 47 inches.

Avant All Around Grapple 

The Avant all around grapple is made for the smaller Avant loaders and uses a hydraulic cylinder to open and close the attachment.  The width of this grapple is 35.4 inches so its great for getting into tight places.

Avant Silage Grapple

The Avant silage grapple is a great tool for moving around hay and feed around the farm.  The bottom forks penetrate the feed and the top hydraulic grapple clamps down to hold.  31.5, 35.5, 41.3 and 51.2 inch wide models available.

Avant XL Silage Grapple

The extra large silage grapple is designed with 2 hydraulic cylinders and is made to maximize the amount of straw and feed that can be moved at one time.  43.3, 51.2 and 59.1 inch wide models available.

Avant Silage Dozer Blade

The Avant silage dozer blade is designed to push uneaten food back to the cattle.  The blade is designed to be used with the Avant silage grapple.

Avant Silage Cleaning Blade

The Avant silage cleaning blade is a straight blade with a rubber bottom designed to remove old silage from the floor.  This blade is designed to be used with the Avant silage grapple.

Avant Silage Dispenser 

The silage dispenser by Avant is filled at the top of the attachment and then distributes silage out the left and right side of the bottom of the attachment.  This dispenser can hold 23 cubic foot of material.

Avant Feed Mover Screw

The Avant feed mover screw uses the auger to push feed back to the cattle.  This attachment has 55.1 inch auger working width.

Avant Silage Block Cutter

The Avant silage block cutter allows the loader to cut silage directly from the silo.  This attachment uses two hydraulic cylinders and is available in 39.4 and 51.2 inch models.

Avant Carousel Broom

The Avant carousel broom uses a 39.4 inch brush head to sweep materials to the side and away from walls.  The head spin direction can go clockwise or counter clockwise.

Avant Round Bale Grab

The Avant round bale grab allows the loader to move and place plastic wrapped round bales with out destroying the plastic.  The max grab width of this attachment is 59 inches and different max lifting weight depends on the Avant loader using this attachment.

Avant Square Bale Grab

The square bale grab by Avant can lift square bales ranging from 31.5 to 47.3 inches wide.  The design of this attachment allows it to pick up these bales with out destroying the plastic wrapping.

Avant Bale Handler Attachment

The Avant bale handler attachment can transport bales without tearing up the plastic.  The bottom holders can be adjusted manually for different width bales.

Avant Bale Fork Attachment

The Avant bale fork attachment is used to lift and transport unwrapped bales.  A model for round bales and model for square bales are available.

Avant Round Bale Splitter

The Avant round bale splitter cuts bales with a force of 48,500 pounds.  This includes the cutting of frozen bales.

Avant Bedding Distributor Bucket

The bedding distributor bucket by Avant is a quick way to distribute bedding to poultry farms, cow pens etc.  The hopper can hold 28.3 cubic foot of bedding and a 11.8 inch wide belt at the bottom distributes bedding either to the left or the right.  

Avant Manure Fork

The Avant manure fork is 43.4 inches wide and comes with replaceable bolt on tines.  

Avant Grain/ Flour Dispenser Bucket

The Avant grain or flour dispenser can hold 10.6 cubic foot of crushed grain or flour and the hydraulic motor and auger at the bottom of the attachment can dispense the feed to the left or the right.
​

Avant Push Broom Attachment

The push broom attachment by Avant h​as no moving parts and is available in 51.2 inches and 78.7 inch wide models.

Avant 3 Point Hitch Adapter

The Avant 3 point hitch adapter is used to transport other farm equipment that use a 3 point hitch hookup.​

Avant Horse Manure Collector

The Avant horse manure collector is mounted on the front of an Avant bucket and is 37.4 inches wide.​

Avant Front Cultivator

The front cultivator from Avant is used to break up hard soils before harrowing.  This attachment comes with 2 wheels in the front and is 55.5 inches wide.​

Avant Horse Arena Harrow

The Avant horse arena harrow is the perfect attachment for smoothing out riding areas.  Two spring loaded tine rows help loosen the soil then a leveler smoothes out the dirt.  Finally a roller combs over the dirt for a finished looking surface.  This attachment has a 53.2 inch working width.​

​Avant Big Bag Transport

The big bag transport from Avant is an easy way to move around and stack large and heavy bags.  The lift arm can be adjusted up to handle taller bags.​

Avant Slurry Mixer Attachment

The Avant slurry mixer attachment ​is made to mix the slurry made from cattle.  This is a unique attachment that is only needed by cattle farmers that have a slurry collection system.

Avant Multifunction Drive Attachment

The Avant multifunction drive attachment is one power head that can be used for many things.  This attachment can be fitted with a wood screw (for breaking up logs and stumps), a concrete mixer, a screening drum, a cable/ hose reel, an auger and a carousel broom.

Avant Adapter Plate

There are many different adapter plates available to turn your non Avant attachment into a compatible one.  These adapters include mini skid and universal skid steer models. ​

Avant Tilt Adapter

The Avant tilt adapter allows the Avant attachment to be tilted 12.5 or 90 degrees (depending on model) clockwise or counterclockwise.  This attachment is useful when cutting drainage with a bucket or loading/unloading with forks on uneven surfaces.​

Avant Side Shift Adapter

The Avant side shift adapter a​llows the loader to shift the attachment to the left or the right.  If a hydraulic attachment is being used the loader must be equipped with the second auxiliary hydraulic outlet.

Avant Attachment Rotator

The attachment rotator by Avant is used between the loader and the attachment and can spin the attachment 360 degrees clock wise and counterclockwise.